filter inductors high current iha vishay dale www.vishay.com for technical questi ons contact magnetics@vishay.com document number: 34014 38 revision: 18-apr-06 electrical specifications inductance: measured at 1.0 v with zero dc current current rating: maximum continuous operating current (dc or rms) based on 50 c temperature rise dielectric rating: 2500 vrms, 60 hz, applied for one minute between winding and outer circumference to within 0.250" [6.35 mm] of the insulation sleeve edge operating temperature: - 55 c to + 125 c (no load) - 55 c to + 75 c (at full rated current) mechanical specifications winding: layered solenoid type wire: solid soft copper terminals: tinned copper leads encapsulant: polyolefin tubing core material: ferrite applications noise filtering for switching regulators, power amplifiers, power supplies and scr and triac control circuits features ? printed circuit mounting (axial leads) ? pre-tinned leads ? low cost construction ? protected by polyolefin tubing - flame retardant ul type vw-1 per mil-i-23053/5, class 3 requirements standard electrical specifications model ind. at 1 khz (h) tol. dcr max. (ohms) rated current (max. amps) iha-101 50 10 % 0.120 2.5 iha-102 100 10 % 0.160 2.1 iha-103 250 10 % 0.280 1.8 iha-104 500 10 % 0.420 1.6 iha-105 1000 10 % 0.600 1.4 iha-201 27 10 % 0.060 3.7 iha-202 50 10 % 0.085 3.1 iha-203 100 10 % 0.120 2.7 iha-204 250 10 % 0.200 2.4 iha-205 500 10 % 0.320 2.3 iha-301 5 10 % 0.015 6.8 iha-302 10 10 % 0.021 6.1 iha-303 27 10 % 0.040 4.8 iha-304 50 10 % 0.050 4.3 iha-305 100 10 % 0.070 4.2 iha-501 5 10 % 0.010 9.3 iha-502 10 10 % 0.015 8.3 iha-503 27 10 % 0.030 6.5 iha-504 50 10 % 0.040 6.1 iha-505 100 10 % 0.060 5.9 dimensions in inches [millimeters] model a (max.) b (max.) c 0.002 [0.050] iha-101 0.475 [12.07] 0.800 [20.32] 0.032 [0.813] iha-102 0.475 [12.07] 0.800 [20.32] 0.032 [0.813] iha-103 0.475 [12.07] 1.050 [26.67] 0.032 [0.813] iha-104 0.550 [13.97] 1.050 [26.67] 0.032 [0.813] iha-105 0.550 [13.97] 1.175 [29.85] 0.032 [0.813] iha-201 0.500 [12.70] 0.800 [20.32] 0.032 [0.813] iha-202 0.500 [12.70] 0.800 [20.32] 0.032 [0.813] iha-203 0.500 [12.70] 0.920 [23.37] 0.032 [0.813] iha-204 0.600 [15.24] 0.920 [23.37] 0.032 [0.813] iha-205 0.750 [19.05] 1.050 [26.67] 0.032 [0.813] iha-301 0.475 [12.07] 0.800 [20.32] 0.032 [0.813] iha-302 0.475 [12.07] 0.920 [23.37] 0.032 [0.813] iha-303 0.550 [13.97] 0.800 [20.32] 0.032 [0.813] iha-304 0.550 [13.97] 0.920 [23.37] 0.032 [0.813] iha-305 0.550 [13.97] 1.175 [29.85] 0.032 [0.813] iha-501 0.475 [12.07] 1.050 [26.67] 0.040 [1.02] iha-502 0.475 [12.07] 1.050 [26.67] 0.040 [1.02] iha-503 0.700 [17.78] 1.050 [26.67] 0.040 [1.02] iha-504 0.700 [17.78] 1.050 [26.67] 0.040 [1.02] iha-505 0.700 [17.78] 1.300 [33.02] 0.040 [1.02] marking - vishay dale - model - date code description iha-101 50 h 10 % eb e2 model inductance value inductance tolerance pac k ag e code jedec lead (pb)-free standard global part number model package code 0.125 [3.18] schematic 1.25 [31.75] min. typ. b max. c typ. a max. rohs compliant i h a 1 0 1 e b
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
